Researchers Develop A Strategy That Allows A Single Polymeric Material to Produce RGB Light (Material Science)

Researchers develop a strategy that allows a single family of polymeric materials to emit light in any of the three primary colors

Many researchers in the field of materials science constantly seek novel and versatile platforms that can be used to tailor materials to match their intended use. One example of this are covalent organic frameworks (COFs), an emerging class of crystalline porous polymers with a favorable set of fundamental properties, namely crystallinity, stability, and porosity. This combination makes them, in theory, adjustable to many modern applications. Unfortunately, owing to the way COFs are usually obtained, these properties are not very pronounced, resulting in unstable, low-crystallinity solids with limited porosity.

At the Japan Advanced Institute of Science and Technology, Dr. Zhongping Li, Associate Professor Yuki Nagao, and colleagues are trying to put an end to this issue and showcase the true potential of COFs. In their latest study, which was published in Angewandte Chemie International Edition as Very Important Paper, Dr. Nagao, Professor Donglin Jiang at the National University of Singapore, and his team devised a novel strategy for easily tuning the light-emitting properties of hydrazone-linked COFs to produce red, green, or blue (RGB) light by using a single material. This work was the result of a lot of efforts by many researchers including first-author Zhongping Li, Keyu Geng, Ting He, Ke Tian Tan, Ning Huang, Qiuhong Jiang, and Donglin Jiang at the National University of Singapore.

The researchers had been exploring a new concept that involves introducing atoms or small molecular groups into the pore walls of COFs. Though the changes in composition are relatively minor, the orderly introduction of these groups in surface sites causes drastic effects in the electronic structure of the entire molecule, altering some of its physicochemical properties. Without really expecting it, the researchers found that the small perturbations introduced in single surface sites greatly modified the light-emission characteristics of hydrazone-linked COFs.

The fluorescent emission spectrum of COFs can be precisely tailored by simply selecting an appropriate atom or molecular group to be introduced as a surface perturbation. This provides one of the few frameworks in which a single type of material can be tuned to emit light in colors all over the visible spectra. © Zhongping Li and Yuki Nagao from Japan Advanced Institute of Science and Technology

More specifically, by introducing hydrogen, chlorine, methoxy, methyl, or hydroxy surface sites on the pore walls of COFs (see Figure 1), the team produced compounds that could be fine-tuned to emit light at various distinct frequencies within the RGB spectrum. Surprisingly, these COFs are among the few known material frameworks that can be easily tailored to emit any one of the three primary colors, and even colors in-between (see Figure 2). This is in stark contrast to most available RGB technologies, which require different materials to produce the three primary colors. “Thanks to the exciting features we observed, COF-based materials offer a solution to the low tunability problems found in organic/polymeric light-emitting materials,” remarks Dr. Li, “By introducing perturbations with multiple wall surface sites, our frameworks can be used to edit the light-emission of materials to achieve any given color in a pre-designable and digital way.”

Importantly, aside from these useful color tunability properties, the synthesized COFs were also up there in terms of luminescence, stability, and sensitivity to guest molecules. This combination of features makes the proposed framework especially attractive for light-emitting and sensing implementations using organic and polymeric materials, as well as for other types of applications, as Dr. Li explains: “Our perturbation strategy of introducing single atoms or small groups to induce electronic effects is compatible with further functionalization and should be widely applicable to other types of COFs.”

It’s possible that the strategy devices in this study will shape a new regime in light-emitting organic materials, which shall be useful for highly sophisticated applications and daily-life devices alike. Further refinement of similar methods will let us truly harness the power that even small, yet rational changes can have in the macroscopic behavior of certain materials.

Featured image or figure 1: By introducing different atoms or small groups in the pore sites of hydrazone-linked COFs, the electronic structure of the molecules can be strategically modified. As a result, the light-emitting properties of COFs can be changed, allowing them to emit in any of the three primary colors. © Zhongping Li and Yuki Nagao from Japan Advanced Institute of Science and Technology


  • Title of original paper: “Editing Light Emission with Stable Crystalline Covalent Organic Frameworks via Wall Surface Perturbation”
  • Journal: Angewandte Chemie International Edition
  • DOI: 10.1002/anie.202107179
  • Funding information: This work is supported by an MOE tier 1 grant (R-143-000-A71-114) and a NUS start-up grant (R-143-000-A28-133).

Provided by JAIST

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s